Air condition (HVAC) Ventilation ducts

Built into the air ducts of ventilation and air conditioning systems (AHU/HVAC), the modules prevent the multiplying of dangerous viruses, bacteria, mold and spores and their distribution.

A perfect solution for large ducts with high air flows.

The installation is carried out in such a way that the air flow hits the UV lamps vertically and therefore receives the highest possible dose of UVC radiation.

The modules consist of batteries with 4 or 6 lamps, built in a sturdy stainless steel frame. The different lengths and widths of the modules allow the use in almost all duct dimensions, since the cross-flow allows them to be mounted side by side or as a labyrinth. Each module has a control box with optical monitoring of the individual emitters.

Air condition (HVAC) UV Duct FL

The UV-DUCT-FL has been designed for installation as a UV barrier in the end segments of ventilation systems. The purpose it serves is to inhibit the spread and distribution of dangerous viruses, bacteria, fungus, and spores within the ventilation systems. The UV-Duct-FL cleans the air continuously as it passes by high-output UV lamps. This also results in the elimination of the unpleasant biofilm that can grow on the inner surface of climate control systems.

The device will be an effective inhibitor against harmful microorganisms that otherwise thrive in the dark, humid conditions of HVAC systems. Furthermore, it as an effective force against 'sick building syndromes' such as Monday fever, asthma and allergies. Installation of the UV Duct FL will result in an increase in the standards of hygiene, without the need for expensive and environmentally harmful chemicals.

Air condition (HVAC) Handling Ventilation

Fields of application:

The modular system UV-STICK-SCR is installed in air conditioning (HVAC).

It effectively inactivates viruses, bacteria, fungi and spores. At the same time, UV-C radiation prevents the dangerous biofilm on the surfaces of cold registers, heat exchangers or filter systems and

prevents deposits of bacteria and moldy spores. 

Furthermore, the growth conditions of f.e. Legionella

Pneumophila, tuberculosis and influenza viruses, as well as other pathogens are particularly favored in air conditioning systems and as a result of volatile organic compounds, conditions such as asthma and allergies, the so-called "sick building syndrome" and Monday fever can be caused.

The UV-STICK-SCR improves efficiently while reducing 

maintenance, disinfection and operating costs.

With decreasing energy consumption, the efficiency of your 

system increases at the same time.

Air condition (HVAC) Sterilize Water

Fields of application:

UV-STYLO-E is designed to sterilize water in pans, drains, purification units, etc. Thus, the device is ideal for use in the water collection pansof humidification units.

By installing in circulating water UV-STYLO-E effectively and efficiently inactivates viruses, bacteria, fungi and spores. It prevents their multiplication while reducing the dreaded biofilm. The use of germicidal UV-C radiation is particularly important in air conditioning systems, as they offer ideal growth conditions for germs without UV-C disinfection.

Within humidification systems, the water is sprayed through evaporation plates. The leachate collects in the pool and carries sediments, causing algae and mold in the humidification system. Water is constantly sprayed in the chamber, which quickly leads to the formation of unpleasant biofilms on all surfaces within the humidification system. The biggest risk, however, is that life-threatening pathogens such as Legionella pneumophilla and tuberculosis may spread in the air.

Air condition (HVAC) Decontamination Unit

The UV-MAX-D is installed as a UV barrier in the end segments of ventilation systems. In this capacity, it serves to inhibit the spread and distribution of dangerous viruses, bacteria, fungus, and spores within the affected systems.

A high-output mid-pressure lamp allows for reliable decontamination even at high air speeds (e.g. in narrow ducts within ventilation systems).

• UV-C high-output mid-pressure lamp

• Ozone-free by way of special quartz housing

• Lamps built into quartz tube

• Stainless steel retrofit adapter system

• Stainless steel housing AISI 304

• 1000 or 2000 Watt output

• All components tested UV-C durable

• Safety category IP 55, class II

• Power provision through a separate housing with electronic ballast and external control device

• Easy installation from outside of the air duct

Air condition (HVAC) Disinfection of Fan Coils

The UV-FCU-CL is a UV disinfection device suitable for treating the internal section of fan coils. In areas such as these, condensation water is formed that is vulnerable to pathogens (Sick Building Syndrome, Legionnaires’ disease, Tuberculosis). The UV-FCU-CL will treat this and other sections such as the thermal battery. These devices are available in a number of configurations to offer solutions for all spatial and technical requirements.

Features

⦿ Programmable device - Set times for irradiation
⦿ Automatic system shut down - A safety feature switches off the lamps in case of the entry of any person
⦿ Fault alarm. In case of lamp failures
⦿ Lamp operation hour counter

PLEASE CALL FOR DETAILS OF ANY OF THE HVAC PRODUCTS ABOVE